C.P.Bourg Document Finisher E Series, Руководство оператора

Страница: 59 / 75

Operator Manual
Page 9 - 59
Initial issue: 02/13
Latest revision: -
10.3.1 BDF-e adjustment in RUN mode
This menu gives an overview and allows parameters adjustment while machine is running.
Press the BDF-e button to access to the setting parameters.
Four adjustment areas are available:
- Stitcher area for paper size and stitching.
- Folder area for folding.
- Trimmer format for trimming.
- Output conveyor area for output conveyor.
This buttons are used as described below:
Press this button to reset the counter output conveyor value and force the offset of
a booklet.
Output conveyor forced advance.
Activation and deactivation of the folding (and so of the trimmer).
When this function is deactivated, the next set will come out in the upper receiving
tray.
Activation and deactivation of the trimmer.
When this function is deactivated, the next set will come out on the output conveyor
but not trimmed.
Stitcher
Folder
Trimmer
Output
conveyor