C-Nav 1000 R4, Руководство по установке

Страница: 16 / 82

MOUNTING Page 10
4.1.4 Panel Mounting
1. Determine where to install the R4 Display, see Figure 4-4 below for
dimensions. Make sure that there is enough depth behind the panel, see
Figure 4-5. Please note that the signal cable has a maximum bending
radius of 10 centimeters.
5,5
Figure 4-4: Panel mount frame dimensions
Figure 4-5: Clearance distance behind the display
2. Make one rectangular hole and four round holes in the panel, as
illustrated in Figure 4-6. (If the hole template is available, place the
template in the right position and drill and saw according to the
template. If this method is used, exclude step 3 and 4 in this
instruction.)