C-Nav 1000 R4, Руководство по установке

Страница: 37 / 82

SYSTEM CONFIGURATION AND SETTINGS Page 31
6.9 Configuring Output Sentences
The sentences that are sent on each of the user ports are configurable on
sentence level. The sentences that can be output from the R4 Navigation
System are listed in section 7.4. Each sentence configured for output will
increase the load on the port. Only turn on the sentences that you intend to
use.
To configure output sentences, follow the steps described below. Step 1 and
2 are identical to the first two steps described in section 6.8.
1. Enter
Config mode by pressing the
MODE
key followed by function
key
CONFIG
.
2. Press the
PAGE
key, and then function key
I/O Config.
The I/O
Configuration view is shown.
3. Press function key
Output Config
to display the Port Output
Configuration view, as illustrated below.
4. Press the function key corresponding to the port to configure output
sentences for. The view for configuring output sentences is displayed,
as illustrated below.