●
Known Mass of calibration weight for scale:
The displayed mass is the mass of
the calibration weight entered on the SmartFeed (see
Section 3.7
).
●
Times to upload data:
enter the specific minute and second of each hour for
automatic upload.
Use the format (:mm:ss) when entering digits for “Times to upload data”.
●
Time to reset the animal feed quota:
Enter the specific time of quota reset.
Resetting the quota will set the animal’s feed intake to zero. This allows the user
to specify what time of day the animals are allowed to eat again.
●
This feeder is set to:
When calculating animal intake, SmartFeed must know
what state it is set to. When using the training latch (
Section 2.1
) set this to
“Training” for all other settings, use “Normal”
●
Email:
You can assign different alerts to different email addresses. For instance,
when a bin is nearly empty, it will email a particular person or a group of persons.
Enter email address(s) for notifications. Multiple emails can be entered by
separating with a comma
(e.g [email protected],[email protected]).
Any adjustments made in the configuration will sync with the SmartFeed system while
it is connected to the Internet.
Once changes have been made, click Save Settings. You will receive a confirmation.
25
