2.2.
Manually Opening the Door
Caution! Unlatching the door manually using the latch release switch will cause
SmartFeed to automatically close the door with extreme force, which could result in
injury. The Control Feed App “Unlock Door” button *must* be used to unlock the
door if SmartFeed is powered on. (See Section 4 for instructions on using the
Mobile app.) The latch release switch should only be used if SmartFeed is powered
off.
To open the door manually:
1. Locate the latch release switch. This switch can be found hidden between the
door and the back wall plate under the training bar.
Figure 7) Location of the Manual Door Unlock Switch
2. Place your hand between the gate and the front of the feeder. You will feel a
small lever sticking out the top of the latch housing. Push the lever towards the
outside of the machine.
11