synchronized feed intake records. Please contact C-Lock Inc. for assistance in configuring
your network.
2.5.1.
WiFi
SmartFeed can be configured to connect to any WiFi network. Please see
Section 3
for
instruction on using Control Feed to configure SmartFeed to use a new WiFi network.
2.5.2.
Ethernet
Additional equipment must be installed into SmartFeed to allow for an Ethernet
connection. To use an ethernet connection, please contact C-Lock.
2.5.3.
Cellular
If your SmartFeed(s) came with a cellular modem, they will already be configured to
connect to the modem. For US customers, the modem will also include a pre-installed
SIM card. No additional work is required.
For international customers, an activated 2FF “Mini SIM” card will be required. Please
ensure that the SIM card has a data plan allowance of at least 1GB per month of data.
For instructions on installing the SIM card, see Appendix B.
2.6.
Calibrating and Checking the Scale
It is recommended to recalibrate the scale any time the feed bin is removed or the
system is moved or repositioned.
It is recommended to check the scale for accuracy every time the bin is empty - or on
a weekly or monthly basis. This will ensure accurate readings.
SmartFeed operates on the principle of bin weight changes. If at any time, the
operator must change the amount of feed in the bin, it is important to mark that
event so that it’s not interpreted as unknown intake. To mark an event as an empty or
fill event, please see
Section 3, part 6g
.
15