BYD L3 AUTO, Руководство пользователя

Страница: 115 / 202

BYD L3
AUTO Owner’s Manual
Tips on Driving BYD L3 2-3
Fuel Cut-off System
In case of accident, when the engine
stops running, the engine control
system will cut off fuel supply to the
engine to reduce the danger of fuel
leakage to the minimum. When fuel
pump stops work, to restart the
engine, turn the ignition switch to ACC
or LOCK, then restart it.
NOTE
Check the ground under the car
before restarting the engine. If
any liquid leakage on the ground,
the fuel system may have damage
and need repair. Do not restart
the engine in this case.
Three-Way Catalytic Converter
Three-way catalytic converter is an
emission pollution control device
integrated in emission system.
It is intended to reduce pollutant in
emission.
NOTE
● When the engine is running,
stay away and keep
inflammable material from the
exhaust pipe. The hot gas from
the exhaust pipe may cause
injury or fire.
● Avoid driving on ground
covered with grass, leaves, paper
or other inflammable objects, and
it is especially prohibited to park
the car or leave the engine
running idle on such ground.
NOTE
Large amount of uncombusted
mixture
gas entering the
three-way catalytic converter may
cause overheat of the converter
and even fire. To prevent such
danger,
please follow the
instructions below:
◆
Only use unleaded gasoline.
◆
Do not drive the car when the
fuel level is extremely low;
insufficient fuel may cause
misfire in the engine and
overload in three-way catalytic
converter.
◆
Do not let the engine run for
over 10 minutes at high idle
speed or over 20 minutes at
low idle speed.
◆
Do not let the engine runs
overspeed.
◆
Do not push or pull the car for
starting.
◆
Do not turn off ignition switch