BYD e6A Скачать руководство пользователя страница 31

Страница: 31 / 195

BYD e6A AUTO Owner's Manual

Operation of Instruments and Controllers 1-13

If any of the following conditions occur, it

suggests that there is a fault with the

components monitored by the warning

indicator system. Please contact a BYD

service station for an inspection of the

vehicle:

●

This light does not come on or remains on

when the power is switched to "ON" position.

●

This light comes on while driving.

The instantaneous flashing of the warning

light during operation is a normal condition.

Tips

Please park the vehicle in a safe place

immediately and contact a BYD service

station if the following conditions occur.

●

This light does not come on or remains

on when the power is switched to "ON"

position.

That means that the EPS system may

not work properly; please park the

vehicle in a safe place immediately.

●

This light comes on while driving.

(k) Power Battery Fault Indicator

If this indicator comes on, it suggests that

there is a fault with the power battery. Please

contact a BYD service station as soon as

possible for an inspection of the vehicle.

(l) Power Battery Overheat

Indicator

When this light comes on, it means that the

power battery temperature is too high. The
vehicle must be stopped to let the battery cool

down.

The power battery may overheat in the

following operating conditions:

●

Driving uphill for a long distance in hot

whether.

●

The vehicle stops and starts frequently in

heavy traffic; frequent harsh acceleration

and sudden braking; or the vehicle keeps

running for a long time without a break.

●

When the vehicle is used to tow another one.

(m) Power Battery Charging

Connection Status Indicator

This light will come on when the power

battery is nearly out of power. The power

battery must be charged as soon as possible.

(n) READY Indicator

This light indicates that all the vehicle

systems are in a proper condition and the

vehicle is ready to go.

(o) Front passenger airbag on

and off indicator

If this indicator comes on, it means that the

airbag system at the front passenger seat is

in the off status.

Содержание e6A




































































































































































































Результаты поиска

Содержание e6A

Отзывы:

Похожие инструкции для e6A

Бренды по названию

Популярные бренды

BYD e6A, Руководство пользователя

Результаты поиска

Содержание e6A

Отзывы:

Похожие инструкции для e6A

Бренды по названию

Популярные бренды