Battery Box Premium HV Combiner Box
Installation Manual V1.
1
1
2
Additionally required mounting material (not included in the scope of delivery):
• Four M5 screws. Take wall properties into account when choosing the screw type.
• Four washers.
• If necessary, four screw anchors. Take wall properties into account when choosing the screw
anchor type.
Figure 3 Dimensions of the Combiner Box
Procedure:
1. Mark the position of the drill holes on the wall or stand.
2. Drill holes at the marked positions.
3. If necessary, insert the screw anchors.
4. Fasten the Combiner Box to the wall or stand using suitable screws and washers.
5. Ensure that the Combiner Box is securely fixed.
Damage to cable glands and plug connections due to improper transport and installation
The cable glands and plug connections protrude from the enclosure.
• When transporting and mounting the Combiner Box, ensure that the cable glands and plug connections
are not damaged.
BYD Smart Device Hungary Kft.
