BWT Perla Hybrid, Инструкция по установке и эксплуатации

Страница: 36 / 84

36
EN
9 4 2 Performing a connection test
The connection test checks the connection of your
product to and from the cloud. This ensures that the
connection is working from both sides.
Requirement:
Connection setup via GSM, LAN
or Wi-Fi, as well as registration, must have been
successfully performed.
Starting the connection test:
> Settings > General Information > Connec-
tion
► Press
Connection test
.
The connection is active if the response time is
displayed.
If
Failed is displayed, check the connection or con-
tact your system administrator if necessary.
9 4 3 Managing connections
Activating connections
The connection wizard guides you through the menu
to set up the desired connection.
The sliding switches can be used to activate/deacti-
vate connections. The sliding switches of activated
connections are displayed in Blue.
► Press the sliding switch of the connection you
want to activate or start the connection wizard.
Further information is available in the related
chapter:
– “9.1 GSM – connection wizard”, page 29
– “9.2 LAN – connection wizard”, page 31
– “9.3 Wi-Fi – connection wizard”, page 33
Deactivating connections
Existing connections can be deactivated at any time.
> Settings > General Information > Connec-
tion
► Press the sliding switch of the connection that
you want to deactivate.
A grey sliding switch indicates that the respective
connection is deactivated.