13
EN
4 4
Multi-info touch display
The product is equipped with a touch display. It
can be operated intuitively and provides a quick
overview of all product parameters.
During start-up, you can select basic parameters
on the display:
● Country-specific settings at the location of op
-
eration
●
Unit for measuring water hardness at the loca-
tion of operation (°dH, °f, mol/m
3
, ppm calcium
carbonate)
● Inflow water hardness (enter manually or input the
value stored in the
hydromaps
water hardness
database for the location of operation)
●
Desired outlet water hardness
Depending on your settings, you will see the current
parameters on the display during operation:
● Current flow volume in l/h (fully softened water
plus inflow water)
Outlet water
= flow volume in l/h
Inflow water
Blending valve
Fully softened water
= displayed volume in litres
NOTE
►
A comparison of the displayed vol-
umes using a domestic water meter is not
possible.
●
Water and regenerative consumption
●
Regenerative level (via ultrasound sensor in the
Easy Fill technology cover)
● Reminders for filter backwashing, filter change
and other maintenance work
4 2
Regeneration
●
Exchange of hardness forming substances Ca
and Mg ions for Na ions from the regenerative at
the ion exchanger.
●
A precision brine meter measures out the brine
required.
●
The product is equipped with a device that
disinfects the ion exchange material during
regeneration.
●
By measuring data acquisition during brine
extraction, the regeneration process is adapted
to the respective pressure conditions, the regen-
erative and regeneration water consumption is
reduced to the required minimum.
●
The optimised brine preparation process produc-
es as much brine as needed for regeneration in
less than 0.5 hours.
●
The brine collects in a special sink of the regen-
erative container and is fully extracted from there.
After brine extraction, there is no liquid left in the
regenerative container.
●
An ultrasound sensor in the Easy Fill technology
cover measures the regenerative level.
●
The regeneration is proportional. 100% regener-
ation takes place after 72 hours at the latest for
hygiene purposes.
4 3
Regenerative monitoring
●
100% in the multi-info touch display corresponds
to a regenerative filling level of approx. 46 cm.
●
From a level of around 20%, the device status
indicator changes from “blue” to “yellow” to signal
a need to refill the regenerative.
