BW Broadcast DSPXtra-FM Скачать руководство пользователя

Страница: 45 / 63

Remote Control Application

EMOtE

OntrOL

dSPX

tra

-FM

In addition to the front panel LCD control system the DSPXtra-FM has a USB port, a serial port and an ether-

net/LAN port. These allow remote control of the DSPXtra-FM through a remote application program running on a

windows based PC. The remote control program is available for download from www.bwbroadcast.com

The USB port on the front panel of the DSPXtra-FM is a USB/Serial convertor module. The USB signals from

your computer are converted to serial commands which the DSPXtra-FM controller understands. This is trans-

parent to the user but as far as the DSPXtra-FM is concerned the USB port is a serial device. The remote con-

trol application on your computer will select the USB device through a virtual comm port driver (VCP) which is

a driver that you will need to install on your computer in order to connect to the DSPXtra-FM over USB. VCP

driver Installation instructions are contained in Appendix A of this manual.

This section of the manual will refer to only serial and lan ports as the rear panel serial port and front panel USB

port are the same to the DSPXtra-FM. they are only differentiated by the comm port they each have on the host

computer. The DSPXtra-FM internally connects the back panel serial and front panel USB ports together in soft-

ware. you can only use one at any one time. Connecting both to your computer may result in errors.

The DSPXtra-FM can only to talk to the serial system (RS232/USB) or the ethernet/LAN system at any point in

time so you will need to select which one of the two remote control methods you wish to use by selecting the

appropriate option from the remote source parameter which is contained in the system menu accessible from

the DSPXtra-FM’s front panel.

If connecting via an ethernet connection you will need to set the IP address or Hostname that the DSPXtra-FM

is connected at and also include the PORT number that the DSPXtra-FM has been set to use. The default port

that BW use is 1203. You can leave it as is unless you have a reason to change it. Your network administrator

can help you with this.

Remote application

Содержание DSPXtra-FM
































































Результаты поиска

Содержание DSPXtra-FM

Отзывы:

Похожие инструкции для DSPXtra-FM

Бренды по названию

Популярные бренды

BW Broadcast DSPXtra-FM, Руководство по эксплуатации

Результаты поиска

Содержание DSPXtra-FM

Отзывы:

Похожие инструкции для DSPXtra-FM

Бренды по названию

Популярные бренды