BW Broadcast DSPXtra-FM Скачать руководство пользователя

Страница: 46 / 63

Remote Control Application

CONTROL OF THE DSPXtra-FM BY RS232 or USB (SERIAL)

If you wish to use the RS232 or USB port to control the DSPXtra-FM follow the steps below

1. Connect the supplied serial cable to the rear RS232 port or a USB cable to the front USB port

2. Navigate to the ‘REMOTE SOURCE’ parameter (also in system) and select the serial option

3. Run the DSPXtra-FM remote application and you will be presented with a connection screen (see image).

Select the COM port on your computer that you have plugged the serial cable into or select the virtual comm

port corresponding to the USB cable.

4. A password needs to be entered, regardless of password settings on the DSPXtra-FM itself. A password still

needs to be entered even if the passwords on the DSPXtra-FM have been disabled.

5. Click connect on the application and you should receive a ‘please wait’ box while the information is retrieved

from the DSPXtra-FM. Once connected you are then free to control the DSPXtra-FM with the remote application.

Further information on the remote application is contained on the following pages. If the DSPXtra-FM remote

application does not connect or disconnects after a few seconds then it could be that the password is incorrect.

The default password for the DSPXtra-FM is 3779. You are free to change these on the DSPXtra-FM itself (see

information on password control elsewhere in this manual)

NET/LAN PORT

The DSPXtra-FM is equipped with a NET/LAN port for ease of remote control, setup and monitoring.

CONTROL OF THE DSPXtra-FM BY THE NET/LAN PORT

If you wish to use the NET/LAN port to control the DSPXtra-FM follow the steps below

1. Connect a cat 5 cable to the RJ45 port on the DSPXtra-FM and plug this into your network hub/switch. A

Xover cable can be used to connect directly to a PC if you don’t have a switch or hub.

2. . Navigate to the ‘REMOTE SOURCE’ parameter contained in the system menu on the DSPXtra-FM and

select the Network option.

3. Run the DSPXtra-FM remote application and you will be presented with a connection screen (see below) .

Select the Ethernet option.

4. A password needs to be entered, regardless of password settings on the DSPXtra-FM itself. A password still

needs to be entered even if the passwords on the DSPXtra-FM have been disabled.

5. Click connect on the application and you should receive a ‘please wait’ box while the information is retrieved

from the DSPXtra-FM. Once connected you are then free to control the DSPXtra-FM with the remote application.

Further information on the remote application is contained on the following pages. If the DSPXtra-FM remote

application does not connect or disconnects after a few seconds then it could be that the password is incorrect.

The default password for the DSPXtra-FM is 3779. You are free to change these on the DSPXtra-FM itself (see

information on password control elsewhere in this manual)

Remote application connection screen

Содержание DSPXtra-FM
































































Результаты поиска

Содержание DSPXtra-FM

Отзывы:

Похожие инструкции для DSPXtra-FM

Бренды по названию

Популярные бренды

BW Broadcast DSPXtra-FM, Руководство по эксплуатации

Результаты поиска

Содержание DSPXtra-FM

Отзывы:

Похожие инструкции для DSPXtra-FM

Бренды по названию

Популярные бренды