- 16 -
5. Error Management
Problem
Solution
The robot does not function after mounting it. Check the correct connection of the extension cord on
the body and the control box.
When the small green control light found on the adapter
(put under current) is not on, this means that the adapter
is damaged, it has to replaced.
If the rotary switch V. for ball frequency (“Ball/min”) is
set on "zero" then it has to be turned on a bigger value.
Ball released with irregular lengths
Check distance of ball throw discs, discs worn (see page
11.)
The robot sometimes releases balls irregu-
larly: two balls quickly one after the other
then misses to throw a ball.
The silver sign found on the tube of the robot head was
not put exactly to the tp margin of the body tube. Put of
the signs exactly to the top margin of the tube! (page 8.)
Ball jam; the yellow lights flash on the con-
trol unit
Foreign body or defect ball obstructs ball transport
⇒
remove (see page 11.) and switch on the robot again.
Random function (RND) on the control panel
cannot be activated, green indicator light can-
not be switched on
At least two balls must be activated, at least two yellow
indicator lights must glow (see page 7.)
Ball gets stuck between ball throw discs. The
yellow light flash on the control unit.
Pull out the adapter from current, remove ball from it
between the shooting discs, adjust the Ball/min button to
“0” position, then start the play again.
Attention
: If you are not able to solve the problems with the help of this check list, a specialist must
be consulted! Please contact your specialist supplier or the Power Pong service address (page 16.).
Always sign the problem when the power cable is defect. It has to be changed immediately because it
can cause death.
6. List of Replacement Parts
List of Replacement Parts
mobil -100 Body with net
mobil -107 Feeding motor
mobil -101 Robot head
mobil -108 Oscillating head motor
PowerPong 3000 -102 Control unit
mobil -109 Motor for height adjustment
mobil -103 Holder for control unit
mobil -110 Ball throw disc
mobil -104 DC adapter (28V; 2,8A)
mobil -111 Shaft for ball throw disc
mobil -105 Extension cord
mobil -112 Ball placement mechanism
mobil -106 Throwing motor
mobil -113 Motor casing (3 pieces)
Further replacement parts on demand!
