- 11 -
If you turn on the Type RND function at switching on the robot or during play, then the machine plays in
random order the rallies saved in cluster. Always the first rally is played after start.
Tip: If you put such rallies in the cluster which start with service, then the machine makes
among these excercises always a 2 sec long break. So the robot plays like being on a match.
Editing the Cluster memory
(It is possible only in Stop function!)
The exercises saved in the Cluster can be edited (modified) only on there original place, so in the Base
memory.
Playing an exercise in the Cluster on the control panel can be seen the set values of the just played rally, and
on the display its Cluster cell number. If this time you stop the rally, everything stays like it has been be-
fore. If now you step with the “
Mem.t.”
button in the Base memory, then it appears on the display the
number of that base memory cell from where the rally has been saved in the Cluster.
The changes described in the Base memory can be made in this cell, and the changed rally can be the re-
saved to the same place.
Then you can go back to the Cluster memory with pushing the “
Mem.t.”
button, and the play can be
started.
Attention: It will be change now on all those Cluster memory places where this Base program
has been applied.
Deleting the Cluster memory
Deleting the whole Cluster:
With pushing two times the “
Mem.t.”
button, the Clust. LED lights and the C0 cluster number appears on
the display. You can choose the cluster that you want to delete and you can delete all the cells of the cluster
at the same time with pushing the
“Clear”
button for long.
Deleting rallies from the Cluster:
You step in the Cluster memory. You choose that group (C0 ….C9) from where you want to delete a rally
or rallies. You go into the cluster with the “
Mem.t.”
button (both red LED-s light) and you chose the rally
that you want to delete. In this case it is possible to start - then to stop - the chosen rally with the Start/stop
button in order to be sure that you delete the correct one. Then this rally can be deleted with pushing for
long the
“Clear”
button. The number of the cell flashes on the display regarding that it becomes empty.
You can get out from the Cluster memory with pushing for long the
“Quit”
button.
Please note: In case of deleting from the cluster there will be no change in the Base memory.
Calibration
It is worthy to harmonize the mechanics and the electronics of the robot - especially at the control panel’s
replace – regarding that the throwing motors are not exactly the same and the quality of the throwing discs
continuously changes during the play.
When pushing together and for long the two buttons of the
“Trajectory”,
then the robot goes to the calibra-
tion function and it goes to the basic ball. The “CA” sign appears on the display and the robot starts to
throw the balls with a middle tempo.
