INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 31 of 62
2
P1
3
P2
2
8
6
7
3
1
a b
d 5 c 4
KEY
1 – Measures used by the program to perform the
spin and detect the values in P1 - P2
P1 – Weight to be fitted on rim outer side
P2 – Weight to be fitted on rim inner side
2 – Wheel placed to fit the weight on wheel outer
side (arrows both green)
3 – Wheel not placed to fit the weight on wheel
inner side (blue/black arrows)
4 – Wheel balancing suggestions
4a – SPLIT Program (Clip weights program) or
MATCHING Program (
*
)
4b – SPOKES Program (program with adhesive
weights) (
*
)
4c – ECO-WEIGHT Program with weight value to
be fitted (if the value is of blue, the machine
advises not to use it) (
*
)
4d – STATIC Program (
*
) (
•
)
5 – N° user (if selected)
6 – Wheel repositioning button for weights fitting
7 – Display of the weight with the maximum reso-
lution of 1 g
8 – By pressing the button
you will see the
following page where you can select one of the
programs suggested by the machine.
9 – Programs and measurements acquisition but-
tons
(
*
) By pressing directly on the icon, or the value
next to the icon, it goes directly to the balancing
program suggested by the machine.
(
•
) If you choose the "STATIC" program, the ma-
chine will be set for this program (see Par.
14.6.1), and you can no longer go back to this
screen page.
Fig. 40
9
SPLIT program
or MATCHING
SPOKES Program
ECO-WEIGHT
Program
IF THE GUARD AND REPOSITION-
ING FUNCTION ARE DISABLED,
ON POS. 6 BUTTON YOU WILL SEE
THE
ICON THAT WILL AL-
LOW THE WHEEL SPIN WITHOUT
RETURNING TO THE PREVIOUS
PAGE. THE POSITIONING OF THE
WHEEL FOR THE APPLICATION
OF THE WEIGHTS MUST BE DONE
MANUALLY.
1297-M021-1_B
LIBRAK380.3DTEC - LIBRAK380P.3DTEC - LIBRAK430.3DTEC - LIBRAK430P.3DTEC
