GB
Page 32 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
The page shown in
Fig. 31
will be displayed.
Fig. 31
Eco-weight total static
weight
Leds showing positioning in
correct weight fitting point
The wheel can be positioned by turning it in the direc
-
tion indicated by the LEDs until the correct position
is reached (see Par. 15.3.6).
Fit the weight to the wheel as indicated in Par. 15.3.2.
At the end of the procedure, the wheel balancing condi
-
tions can be checked by performing a trial spin.
The ECO-WEIGHT procedure has now been completed.
IMMEDIATELY AFTER HAVING
SELECTED THE ECO-WEIGHT
PROCEDURE (SEE FIG. 31), YOU
CAN KNOW IN ADVANCE THE TWO
DYNAMIC UNBALANCES AND THE
STATIC RESIDUE IN ORDER TO
DECIDE WHETHER IT IS CONVENI-
ENT TO CONTINUE.
IF BOTH DYNAMIC UNBALANC-
ES AND STATIC RESIDUE ARE
SHOWN AS STILL (NOT FLASH-
ING) VALUES ON THE DISPLAY,
THIS MEANS THAT THE PROGRAM
HAS DECIDED THAT IT IS BET-
TER TO CONTINUE. WHILE IF, ON
THE OTHER HAND, ONE OR MORE
VALUES ARE FLASHING, THE
PROGRAM SUGGESTS USING THE
STANDARD ALU-S PROCEDURE.
PRESS KEY
ONCE. THE
TWO RESIDUAL DYNAMIC UNBAL-
ANCES WILL BE DISPLAYED ON
D1 AND D2 SCREENS.
PRESS KEY
ONCE MORE.
THE CALCULATED REAL STATIC
WEIGHT WILL BE DISPLAYED ON
D1 AND THE RESIDUAL STATIC
WEIGHT WILL BE DISPLAYED ON
D2 SCREEN.
IF YOU DO NOT WISH TO OPER-
ATE WITH THE ECO-WEIGHT
PROCEDURE, PRESS KEY
ONCE MORE, ALU-S UNBALANCE
VALUES WILL BE DISPLAYED
AGAIN (SEE FIG. 25).
WHILE IF YOU WISH TO OPERATE
WITH THE ECO-WEIGHT PROCE-
DURE, PRESS KEY
FOR A
LONGER TIME (OR KEY
)
TO GO BACK TO THE RESIDUAL
DYNAMIC / ECO-WEIGHT WEIGHT
DISPLAY SCREENS (SEE FIG. 31).
1294-M015-0_B
LIBRAK240RTLD - LIBRAK240RTLCD
