GB
Page 20 of 52
INSTRUCTION, USE AND
MAINTENANCE MANUAL
• To make a measurement in STATIC mode (STAT):
Press key
to select STATIC balancing program.
The corresponding LED turns on. Press key
to
switch to the entry of the measures required.
Letter
will appear on “D1” display to indicate
rim diameter value entry. The value on display “D2”
starts flashing.
Use keys
/
to set the value required
on “D2” display.
Dimension entry for static mode is completed.
Fig. 17
STAT mode
Weight application
point
Diameter measurement input
•
To make a measurement in DYNAMIC mode (DYN):
Press key
to select DYNAMIC balancing pro
-
gram. The corresponding LED turns on.
DYN mode
Weight application
points
Letter
will appear on “D1” display to indicate the
entry of the rated width value indicated on the rim.
The value on display “D2” starts flashing.
This measure can be detected with a graduated
caliper: place it on wheel outer and inner side (see
Fig.
_
18
).
Fig. 18
MANUAL CALIPER.
Width manual measurement
Use keys
/
to set the measured value
on “D2” display.
Press key
to shift to the next value.
1294-M015-0_B
LIBRAK240RTLD - LIBRAK240RTLCD
