manualshive.com logo in svg

Bushranger TPS261, Руководство владельца/оператора

Поделиться
Скачать
Bushranger TPS261 Скачать руководство пользователя страница 11

＿

 10 

＿

Oil and Fuel

1. Mix and pour fuel outdoors and where there are no sparks or flames.

2. Always shut off the engine before refueling. Never remove the fuel tank cap while the engine is running 

or immediately after stopping the engine.

3. Always open the fuel tank cap slowly to release any possible pressure inside the tank.

4. Do not overfill the fuel tank. Stop filling 10~20mm from the top of the tank.

5. Tighten the fuel tank cap carefully but firmly after refilling.

6. Wipe up any spilled fuel before starting the engine.

7. Move the Pruner at least 3m away from the fueling location 

and fuel storage container before starting the engine.

3m

Minimum

 WARNING

POTENTIAL HAZARD

・

Petrol contains gasses that can build up pressure inside a fuel tank.

WHAT CAN HAPPEN

・

Fuel can be sprayed on you when removing fuel tank cap.

HOW TO AVOID THE HAZARD

・

Remove fuel tank cap slowly to avoid injury from fuel spray. .

 DANGER

POTENTIAL HAZARD

・

In certain conditions petrol is extremely flammable and highly explosive.

WHAT CAN HAPPEN

・

A fire or explosion from petrol can burn you, others and cause property

 

damage.

HOW TO AVOID THE HAZARD

・

Use a funnel and fill the fuel tank outdoors, in an open area, when the engine is cold.

Wipe up any petrol that spills.

・

Do not fill the fuel tank completely. Add petrol to the fuel tank until the level is 10mm below the 

bottom of the filler neck. This empty space in the tank allows petrol to expand.

・

Never smoke when handling petrol, and stay away from an open flame with petrol in an approved 

container and keep it out of the reach of children.

・

Do not mix fuel for more than two month use.

Содержание TPS261

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды