4
Safety Instructions
SAFETY & HANDLING
Do not operate the 36V Multi-Tool before reading all Instructions & reading all
Safety & Handling sections.
Operator Safety
• Wear the necessary safety equipment, as listed on page (6), in the Personal Safety Equipment Section.
• Always wear heavy, long pants. Do not wear loose clothing, jewellery, short pants, sandals or go barefoot. Secure hair
so it is above shoulder length.
• Do not operate the unit if you are tired, ill or under the influence of alcohol, drugs or medication.
Unit Safety
• The product is intended for garden maintenance trimming of organic ground covering such as grass and lawn. The
product must not be used for or modified for uses other than is intended, unless approved by the manufacturer.
• When inspecting the 36V Multi-tool remove the battery pack from the unit.
• Inspect the entire unit and cutting head before each use.
• Ensure that the guard is properly attached.
• Do not use the unit if it is running erratically. Have it serviced promptly.
• Learn how to stop the 36V Multi-tool quickly in an emergency.
• Never allow children or unauthorised persons to operate the unit.
• Do not leave the unit on dry cuttings when it is Hot, as a risk of fire is present.
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs, with
earthed (grounded), power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions, Water entering a power tool will increase the risk of electric
shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool from the charger.
5. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric
shock
6. When operating a power tool outdoors. Use of a cord suitable for outdoor use reduces the risk of electric shock.
7. If operating a power tool in a damp location is, unavoidable, use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock
Electrical Safety of the battery charger
Содержание MULTI-TOOL 36V9701
Страница 1: ...MULTI TOOL 36V9701 OPERATOR S MANUAL ...
Страница 19: ...19 NOTES ...