![background image](http://html.mh-extra.com/html/bushranger/multi-tool-36v9701/multi-tool-36v9701_operators-manual_2835607012.webp)
12
Fig. 27
Fig. 28
Fig. 26
ASSEMBLY PROCEDURES
Cutting Head Assembly
Always ensure the line cutting blade on the guard is covered
with the blade protector when fitting, changing or removing the
trimmer head. Always disconnect the spark plug lead before and
work is done on the trimmer. Never operate the machine without
a cutting head fitted.
Never fit an alternative cutting head that has not been
recommended by the manufacturer. (See Fig. 26)
12
ASSEMBLY
PROCEDURES
Text
STRAIGHT SHAFT CUTTING HEAD
1. Replace blade protector.
2. Align hole in Mounting Washer and
Gearbox slot.
3. Insert Allen Key through hole in Gearbox
Flange, through hole in Mounting Washer
and into gearbox slot. Firmly support
Allen key to lock shaft rotation.
4. Grip the head & rotate
clockwise
to
remove.
5. Refit preferred head in reverse order
& firmly tighten.
NOTE: Not firmly supporting
alignment locking of shaft with the
Allen Key may cause damage to the
Gearbox or Mounting Washer.
It is important to note the direction of
rotation to tighten/remove heads & to
avoid over-tightening or damage to the
Gearbox, Spindle or mounting thread.
Always ensure the line cutting blade on the guard
is covered with the blade protector when fitting,
changing or removing the trimmer head.
Always disconnect the spark plug lead before
and work is done on the trimmer.
Never operate the machine without a cutting head
fitted.
Never fit an alternative cutting head that has not
been recommended by the manufacturer.
BENT/CURVED SHAFT CUTTING HEAD
1. Replace blade protector.
2. Align hole in Mounting Washer & slot in
spindle.
3. Insert Allen Key into hole & firmly
support to lock shaft rotation.
4. Grip the head & rotate
anti-clockwise
to remove.
5. Refit preferred head in reverse order
& firmly tighten.
Cutting Head Assembly
Line
cutting
blade
Blade
protector
3. Allen Key
Mounting Washer
Spindle
2. Align spindle
slot with Mounting
Washer Hole
Gearbox Flange
Mounting Washer
Gearbox
Bump Head
3. Allen Key
2. Align gearbox slot
with Mounting Washer
Hole
HEAD REMOVAL & REPLACEMENT
Bump Head
Head Removal & Replacement (See Fig. 27)
Straight Shaft Cutting Head
1.
Replace blade protector.
2.
Align hole in Mounting Washer and Gearbox slot.
3.
Insert Allen Key through hole in Gearbox Flange, through hole
in Mounting Washer and into gearbox slot. Firmly support
Allen key to lock shaft rotation.
4.
Grip the head & rotate
clockwise
to remove.
5.
Refit preferred head in reverse order & firmly tighten.
Note: Not firmly supporting alignment locking of shaft with the
Allen Key may cause damage to the Gearbox or Mounting Washer.
12
ASSEMBLY
PROCEDURES
Text
STRAIGHT SHAFT CUTTING HEAD
1. Replace blade protector.
2. Align hole in Mounting Washer and
Gearbox slot.
3. Insert Allen Key through hole in Gearbox
Flange, through hole in Mounting Washer
and into gearbox slot. Firmly support
Allen key to lock shaft rotation.
4. Grip the head & rotate
clockwise
to
remove.
5. Refit preferred head in reverse order
& firmly tighten.
NOTE: Not firmly supporting
alignment locking of shaft with the
Allen Key may cause damage to the
Gearbox or Mounting Washer.
It is important to note the direction of
rotation to tighten/remove heads & to
avoid over-tightening or damage to the
Gearbox, Spindle or mounting thread.
Always ensure the line cutting blade on the guard
is covered with the blade protector when fitting,
changing or removing the trimmer head.
Always disconnect the spark plug lead before
and work is done on the trimmer.
Never operate the machine without a cutting head
fitted.
Never fit an alternative cutting head that has not
been recommended by the manufacturer.
BENT/CURVED SHAFT CUTTING HEAD
1. Replace blade protector.
2. Align hole in Mounting Washer & slot in
spindle.
3. Insert Allen Key into hole & firmly
support to lock shaft rotation.
4. Grip the head & rotate
anti-clockwise
to remove.
5. Refit preferred head in reverse order
& firmly tighten.
Cutting Head Assembly
Line
cutting
blade
Blade
protector
3. Allen Key
Mounting Washer
Spindle
2. Align spindle
slot with Mounting
Washer Hole
Gearbox Flange
Mounting Washer
Gearbox
Bump Head
3. Allen Key
2. Align gearbox slot
with Mounting Washer
Hole
HEAD REMOVAL & REPLACEMENT
Bump Head
It is important to note the direction of rotation to tighten/remove heads & to avoid over-
tightening or damage to the Gearbox, Spindle or mounting thread.
Check the machine for the following each time before use:
• The 36V battery is locked into position correctly into the multi-tool (see fig 28).
• That the cutting unit and all safety devices are in perfect condition.
• That all screws are securely fastened.
Содержание MULTI-TOOL 36V9701
Страница 1: ...MULTI TOOL 36V9701 OPERATOR S MANUAL ...
Страница 19: ...19 NOTES ...