4
FUEL
STARTING ENGINE
TRANSPORTATION
WARNING ▲ DANGER
PETROL AND FUEL ARE EXTREMELY
FLAMMABLE. IF SPILLED OR IGNITED BY IGNITION
SOURCE, IT CAN CAUSE FIRE AND SERIOUS
INJURY OR PROPERTY DAMAGE. EXTREME
CAUTION IS REQUIRED, WHEN HANDLING
PETROL OR FUEL.
•Use an appropriate type fuel container.
•Do not smoke or bring flame or sparks near fuel
supplies.
•The fuel tank may be under pressure. Always loosen
the fuel cap and wait for pressure to be equalized
before removing the cap.
•Fill the fuel tank outdoors over bare ground and install
the fuel cap securely. Do not pour fuel indoors.
•Wipe any spilled fuel off the unit.
•Never refuel while the engine is still hot, because a
fuel leak could start a fire.
•Do not store the unit with fuel in its tank, because a
fuel leak could start a fire.
•Bring an extinguisher or shovel in case of fire.
Despite the precautions which can be taken,
operating a chain saw, or just working in the forest,
presents dangers.
•After refueling tighten fuel cap firmly and check for
leakage. In case of fuel leakage repair before starting
operation since there is a danger of fire.
•Move the chain saw at least 3 m from the fueling point
before starting the engine.
•Do not allow other persons to be near the chain saw
when you are starting or cutting with the chain saw.
Keep bystanders and animals out of the work area.
Do not let anyone hold wood for you to cut.
•Do not start cutting until you have a clear work area,
secure footing, and a planned retreat path from the
falling tree.
•Before you start the engine, make sure that the saw
chain is not contacting anything.
•Keep the handles dry, clean, and free of oil or fuel
mixture.
•Operate the chain saw only in well-ventilated areas.
Exhaust gas, oil mist (from chain saw lubrication) or
saw dust saw is harmful to health.
•When transporting your chain saw, use the
appropriate guide bar cover
•Carry the chain saw with the engine stopped, the
guide bar and saw chain to the rear, and the silencer
away from your body.
PERSONAL EQUIPMENT
(CONTINUED)
•
Never wear loose clothing,
unbuttoned jackets, flared sleeves
and cuffs, scarfs, tie-strings,
neck-ties, cords, chains, jewellery,
etc. which could snag the saw chain or
under brush.
• Clothing should be of sturdy, protective
material. It should be snug-fitting to resist
snagging, but roomy enough for freedom of
movement.
• Trouser legs should not be flare or cuffed,
and should be either tucked into the tops or
trimmed short.
• Safety vests, leg chaps and logger’s pants
of ballistic material are available. It is the
operator’s responsibility to wear such
additional protection if conditions warrant it.
• Never operate a chain saw when you are
alone. Arrange to have someone remain
within calling distance in case you need help.
Oil tank cap tighten
diretion clockwise
Fuel tank cap tighten
direction clockwise
FUEL
STARTING ENGINE
TRANSPORTATION
WARNING ▲ DANGER
PETROL AND FUEL ARE EXTREMELY
FLAMMABLE. IF SPILLED OR IGNITED BY IGNITION
SOURCE, IT CAN CAUSE FIRE AND SERIOUS
INJURY OR PROPERTY DAMAGE. EXTREME
CAUTION IS REQUIRED, WHEN HANDLING
PETROL OR FUEL.
•Use an appropriate type fuel container.
•Do not smoke or bring flame or sparks near fuel
supplies.
•The fuel tank may be under pressure. Always loosen
the fuel cap and wait for pressure to be equalized
before removing the cap.
•Fill the fuel tank outdoors over bare ground and install
the fuel cap securely. Do not pour fuel indoors.
•Wipe any spilled fuel off the unit.
•Never refuel while the engine is still hot, because a
fuel leak could start a fire.
•Do not store the unit with fuel in its tank, because a
fuel leak could start a fire.
•Bring an extinguisher or shovel in case of fire.
Despite the precautions which can be taken,
operating a chain saw, or just working in the forest,
presents dangers.
•After refueling tighten fuel cap firmly and check for
leakage. In case of fuel leakage repair before starting
operation since there is a danger of fire.
•Move the chain saw at least 3 m from the fueling point
before starting the engine.
•Do not allow other persons to be near the chain saw
when you are starting or cutting with the chain saw.
Keep bystanders and animals out of the work area.
Do not let anyone hold wood for you to cut.
•Do not start cutting until you have a clear work area,
secure footing, and a planned retreat path from the
falling tree.
•Before you start the engine, make sure that the saw
chain is not contacting anything.
•Keep the handles dry, clean, and free of oil or fuel
mixture.
•Operate the chain saw only in well-ventilated areas.
Exhaust gas, oil mist (from chain saw lubrication) or
saw dust saw is harmful to health.
•When transporting your chain saw, use the
appropriate guide bar cover
•Carry the chain saw with the engine stopped, the
guide bar and saw chain to the rear, and the silencer
away from your body.
FUEL
WARNING DANGER
Petrol and Fuel are extremely flammable. If
spilled or ignited by source, it can cause fire and
serious injury or property damage. Extreme
caution is required, when handling Petrol or Fuel.
• Use an appropriate type fuel container.
•
Do not smoke or bring flame or sparks near
fuel supplies.
• The fuel tank may be under pressure. Always
loosen the fuel cap and wait for pressure to
be equalized before removing the cap.
• Fill the fuel tank outdoors over bare ground
and install the fuel cap securely. Do not pour
fuel indoors.
• Wipe any spilled fuel off the unit.
• Never refuel while the engine is still hot,
because a fuel leak could start a fire.
• Do not store the unit with fuel in its tank,
because a fuel leak could start a fire.
• Bring an extinguisher or shovel in case of
fire. Despite the precautions which can be
taken,operating a chain saw, or just working
in the forest, presents dangers.
•
After refuelling tighten fuel cap firmly and
check for leakage. In case of fuel leakage
repair before starting operation since there is
a danger of fire.
STARTING ENGINE
• Move the chain saw at least 3m from the
fuelling point before starting the engine.
• Do not allow other persons to be near the
chain saw when you are starting or cutting
with the chain saw. Keep bystanders and
animals out of the work area. Do not let
anyone hold wood for you to cut.
• Do not start cutting until you have a clear
work area, secure footing, and a planned
retreat path from the falling tree.
• Before you start the engine, make sure that
the saw chain is not contacting anything
• Keep the handles dry, clean, and free of oil or
fuel mixture.
• Operate the chain saw only in well-ventilated
areas. Exhaust gas, oil mist (from chain saw
lubrication) or saw dust saw is harmful to
health.
Содержание CS4020
Страница 1: ...1 CHAINSAW CS4020 OPERATOR S MANUAL ...
Страница 23: ...23 NOTES ...