manualshive.com logo in svg

Bushranger CS4020, Руководство оператора, Страница: 21 / 24

Поделиться
Скачать
Bushranger CS4020 Скачать руководство пользователя страница 21

21 

SHARPENING 

(CONTINUED)

•  Drive link serves to remove sawdust from the 

groove of the guide bar.  

• 

When setting of the chain is finished, soak it 

in oil and wash away filings completely before 

using. 

• 

When chain has been filed on the bar, supply 

sufficient oil to it, and rotate the chain slowly to 

wash away the filings before using again.

 

• 

If the chain saw is operated with filings clogged 

in the groove, the saw chain and the guide bar 

will be damaged prematurely. 

•  If the saw chain becomes soiled with resin for 

instance, clean it with kerosene and soak it in 

oil.

 

STORAGE

LONG TERM STORAGE 

(OVER 60 DAYS)

 

Do not store your unit for a prolonged period 

of time (60 days or longer) without performing 

protective storage maintenance which includes the 

following:

a.

  Store unit in a dry, dust free place, out of the 

reach of children and other unauthorized persons. 

b.

  Place the ignition in the switch “STOP” position.

 

c.

  Remove accumulation of grease, oil, dirt an 

debris from exterior of unit.

d. 

 Perform all periodic lubrication and services 

that are required.

e.

  Tighten all the screw and nuts.

f. 

 Drain the fuel tank completely and pull the recoil 

starter handle several times to remove fuel from 

the carburettor.

g.

  Always store fuel in approved container.

h.

  Remove the spark plug and pour 1/2 

tablespoon of fresh, clean, two-stroke engine oil 

into the cylinder through the spark plug hole.

•  Place a clean cloth over the spark plug hole.

•  Pull the recoil starter handle 2 or 3 times to 

distribute the oil inside the engine.

•  Observe the piston location through the spark 

plug hole.

•  Pull the recoil starter handle slowly until the 

piston reaches the top of its travel and leave it 

there. 

i.

  Install the spark plug (do not connect ignition 

cable).

j. 

 Cover the chain and the guide bar with the guide 

bar cover before putting them in storage

.

WARNING DANGER

Do not store in enclosure where fuel fumes may 

accumulate or reach an open flame or spark.

NOTE

•  For future reference, you  

should keep this operator’s 

manual. 

•  If this operator’s manual has become illegible 

through impairment or is lost, please purchase 

a new one from your dealer. 

•  When renting a machine together with this 

operator’s manual provides explanation 

and instruction, please rent out the machine 

together with this operator’s manual to a 

person who operates the borrowed machine. 

•  When transferring a product, please deliver it 

attaching the operator’s manual. 

NOTE

 

Specifications, descriptions and illustrative material 

in this literature are as accurate as known at the 

time of publication, but are subject to change 

without notice. Illustrations may include optional 

equipments and accessories, and may not include 

all standard equipment

 

STORAGE

LONG TERM STORAGE (Over 60 days)

WARNING ▲ DANGER

DO NOT STORE IN ENCLOSURE WHERE FUEL
FUMES MAY ACCUMULATE OR REACH AN OPEN
FLAME OR SPARK.

Do not store your unit for a prolonged period of time (60
days or longer) without performing protective storage
maintenance which includes the following:

1. Store unit in a dry, dust free place, out of the reach
of children and other unauthorized persons.
2. Place the ignition in the switch “STOP” position.

8. Remove the spark plug and pour 1/2 tablespoon of
fresh, clean, two-stroke engine oil into the cylinder
through the spark plug hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2 or 3 times to
distribute the oil inside the engine.
C. Observe the piston location through the spark
plug hole.
Pull the recoil starter handle slowly until the
piston reaches the top of its travel and leave it
there.
9. Install the spark plug (do not connect ignition cable).
10. Cover the chain and the guide bar with the guide
bar cover before putting them in storage.

3. Remove accumulation of grease, oil, dirt an debris
from exterior of unit.
4. Perform all periodic lubrication and services that are
required.
5. Tighten all the screw and nuts.
6. Drain the duel tank completely and pull the recoil
starter handle several times to remove fuel from the
carburettor.
7. Always store fuel in approved container.

NOTE
• For future reference, you should keep this operator’s
manual.
• If this operator’s manual has become illegible
through impairment or is lost, please purchase a new
one from your dealer.
• When renting a machine together with this operator’s
manual provides explanation and instruction, please
rend out the machine together with this operator’s
manual to a person who operates the borrowed
machine.
• When transferring a product, please deliver it
attaching the operator’s manual.

STORAGE

LONG TERM STORAGE (Over 60 days)

WARNING ▲ DANGER

DO NOT STORE IN ENCLOSURE WHERE FUEL
FUMES MAY ACCUMULATE OR REACH AN OPEN
FLAME OR SPARK.

Do not store your unit for a prolonged period of time (60
days or longer) without performing protective storage
maintenance which includes the following:

1. Store unit in a dry, dust free place, out of the reach
of children and other unauthorized persons.
2. Place the ignition in the switch “STOP” position.

8. Remove the spark plug and pour 1/2 tablespoon of
fresh, clean, two-stroke engine oil into the cylinder
through the spark plug hole.
A. Place a clean cloth over the spark plug hole.
B. Pull the recoil starter handle 2 or 3 times to
distribute the oil inside the engine.
C. Observe the piston location through the spark
plug hole.
Pull the recoil starter handle slowly until the
piston reaches the top of its travel and leave it
there.
9. Install the spark plug (do not connect ignition cable).
10. Cover the chain and the guide bar with the guide
bar cover before putting them in storage.

3. Remove accumulation of grease, oil, dirt an debris
from exterior of unit.
4. Perform all periodic lubrication and services that are
required.
5. Tighten all the screw and nuts.
6. Drain the duel tank completely and pull the recoil
starter handle several times to remove fuel from the
carburettor.
7. Always store fuel in approved container.

NOTE
• For future reference, you should keep this operator’s
manual.
• If this operator’s manual has become illegible
through impairment or is lost, please purchase a new
one from your dealer.
• When renting a machine together with this operator’s
manual provides explanation and instruction, please
rend out the machine together with this operator’s
manual to a person who operates the borrowed
machine.
• When transferring a product, please deliver it
attaching the operator’s manual.

1 

CHAINSAW

CS4020

OPERATOR’S MANUAL

Содержание CS4020

























Отзывы:

Нет отзывов