7
8.
Press MENU. The camera will save your information, do a GPS
search (allow a few minutes the first time and preferably test
OUTDOORS), then countdown and take a test photo.
Note: the
LCD display will power off while the camera is transmitting the
image
.
If the camera is unable to connect to a valid cell phone # or
email, the display will indicate “Modem Init Fail”.
9.
If “Modem Init Fail” is displayed, try powering camera OFF, then
straight to ON. In ON mode, the camera will also attempt to send
the first image when triggered. After first transmitted image is
confirmed, both setup test images and live ON images should
function properly.
10. The camera displays the signal strength for the last connection.
Check your cell phone or email to verify the test image was
received.
11. After you have verified the camera is transmitting images, move
the switch to ON to initiate “live” triggering, and leave the area.
12. You can now log in to your account
wirelesstrophycam
.
to view new images, change settings, and monitor the status of
one or more wireless cameras. You can also control your camera(s)
remotely via the Bushnell Wireless Cam app, a free download for
iPhone® and Android™.
Quick Start Guide
iPhone® is a registered trademark of Apple Inc.
Android™is a trademark of Google Inc.
