30
(Step 1)
-set Field
Scan Mode to “On”
(Step 2)
-
select Field
Scan "A" (press OK)
(Step 3)
-
set Field
Scan "A" Stop & Start
(Step 4)
(opt)-select Field
Scan "B" (press OK)
(Step 5)
(opt)
-set Field
Scan "B" Stop & Start
Steps 4 & 5 are
optional
(only
required if you want to
set up a second block
of Field Scan recording
with different stop and
start times)
(Step 6)
-select Field
Scan "Interval"
(Step 7)
-
set Field
Scan Interval
Note: the Interval
Setting sets the timing
between each image for
both Field Scan "A" and
"B" recording blocks.
Field Scan photos are saved
to the SD card, but will not be
transmitted wirelessly. images
captured in field scan mode are
stamped with a “T” icon (“Time
Lapse”). Normally captured
photos are stamped with an “M”
icon (“Motion Trigger”)
“T” Icon indicates Field Scan
mode photos
