44
The Aggressor Wireless Cam supports 3 kinds of file system formats,
FAT12, FAT16, and FAT32. The default value is FAT16 to save photos and
videos. Here are some related notes:
• You don’t need to be concerned about the file system format of
the Aggressor Wireless Cam unless your equipment has problems
reading the SD card. If this happens, please format the SD card with
the Aggressor Wireless Cam or in your computer first and then
insert the card into your Aggressor Wireless Cam and try again.
• The default file system format of the Aggressor Wireless Cam is
FAT16, which most computers can read. If you format an SD card for
the Aggressor Wireless Cam in your computer, you should choose
the file system format FAT16. Normally FAT16 is recommended
unless you have another image viewer that uses FAT12 or FAT32
format.
Deleting Photos or Videos
If you see a photo or video during playback on the LCD or video monitor
that you want to delete, it can be done easily without leaving SETUP
mode:
• Press the
MENU
key. You will see the first “Delete” screen, which lets
you selects the option to delete only the currently displayed photo/
video, or all photos/videos
(see below)
.
• Highlight the “Delete Current” or “Delete All” option, then press
OK
.
• Next, select “Yes” and press
OK
to erase only the last displayed
photo or video (if you selected “Delete Current”), or every photo and
video file on the card (if you selected “Delete All”)-or select “No”
and press
OK
to cancel the operation without deleting any files.
NOTE:
after deleting a picture or a video file, the deleted files can’t be
restored! It is also possible to delete all files from the card by using the Format
parameter (see pg. 35).
