Bush WM2760DAB, Инструкция по эксплуатации

Страница: 36 / 56

Using your Bluetooth Micro System
Let’s get started
Using your Stereo Flat Micro System
36
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
3. P02 T00 will be displayed and you can select the second track that you would like to
programme. Continue to select each track as in Step 2, up to a total of 20 tracks.
4. Short press the Preset. button on the Micro or the Prog button on the remote control
again to confirm the last track in the programmed play mode list. Pro FULL will be
displayed when you have selected 20 tracks.
5. Short press the button on the Micro or on the remote control to play the
programmed tracks.
6. To exit programmed play mode, short press the button twice on the Micro or on
the remote control.
Repeat and Random modes
1.
Short press the Repeat button on the the remote control. Rep One is displayed.
Continuously short press the Repeat button to cycle through the available options of :
• Rep One: Repeat (current track)
• Rep All: Repeat all (all the tracks on the CD)
• Random: Random (randomly play the tracks on the CD)
• Normal: Confirms that Repeat and Random mode has been turned off.
Remove the CD
1.
With the CD stopped, Short press the Eject button on the Micro or on the remote
control in CD mode. The CD compartment cover will slide up and Open will be
displayed.
2.
Put your thumb on the central spindle and put your fingers under the outside edge of
the CD and lift off and remove the CD from the compartment.
3. Short press the Eject button on the Micro or on the remote control. The CD
compartment cover will slide down and, Reading followed by No disc will be
displayed.