Bush WM2760DAB, Инструкция по эксплуатации

Страница: 31 / 56

Using your Stereo Flat Micro System
31
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
Using your Stereo Flat Micro System
Let’s get started
Changing the scan setting
In FM mode:
1. Long press the Menu button on the Micro or on the remote control. Scan will be
displayed. Short press the Select button on the Micro or on the remote control.
There are now two different options to choose from:
• Strong (stations)
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality. It is possible that the station you are scanning for may
be missed using this option.
• All (stations)
The scan will stop for every station it receives, even if the signal strength is poor.
2.
Use the or buttons on the Micro or the or buttons on the remote
control to choose from the two options available and short press the Select button.
3. Short press the Menu button on the Micro or on the remote control to exit from the
Menu.
Audio mode
The Micro will automatically switch between Stereo and Mono, depending on the quality
of the signal being received but you can override this function and manually switch
between ‘Stereo’ and ‘Mono’.
Note: You may wish to select ‘Stereo’ if you are listening to your Micro using
headphones.
1.
Long press the Menu button on the Micro or on the remote control. Use the or
buttons on the Micro or the or buttons on the remote control to scroll to
Audio and short press the Select button.