Bush WM2760DAB, Инструкция по эксплуатации

Страница: 27 / 56

Using your Stereo Flat Micro System
Let’s get started
Using your Stereo Flat Micro System
27
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021 .
In DAB mode:
1. Short press the Scan button on the remote control to begin a search for stations. Scan
will be displayed and after a short delay the number of stations found during the scan
will also be displayed.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received in your area.
These are listed with a ‘?’ prefix.
1.
Long press the Menu button on the Micro or on the remote control. Use the or
buttons on the Micro or the or buttons on the remote control to scroll to
Prune. Short press the Select button.
2.
Prune and a flashing N is displayed. Use the button on the Micro or the
button on the remote control to scroll to Y. Short press the Select button to prune the
station list. Stations with a ‘?’ prefix will now no longer be displayed.
3. Short press the Menu button to exit the Menu options.
Storing a DAB station preset
Your Micro can store up to 10 DAB radio stations in its preset memories for instant access
to your favourite stations.
1. Tune the Micro to the DAB radio station that you wish to preset.
2. Long press the Preset button on the Micro or the Prog. button on the remote control
until Empty 1 is displayed.
3. Use the or buttons on the Micro or the or buttons on the remote
control to move the preset number that you would like to store the radio station to
(Empty 1-Empty 10).
4.
Short press the Select button on the Micro or on the remote control to store the
station to that preset location. Stored will be displayed.
Note:
If there is already an existing DAB station stored under a preset, it will be
overwritten when you store the new station.