Bush DLED50UHDHDRS, Инструкция по эксплуатации

Страница: 26 / 64

Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT!
Back up the files on your storage devices
before connecting them to the TV. Manufacturer will not
be responsible for any file damage or data loss. Certain
types of USB devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compatible with this
TV. The TV supports FAT32 and NTFS disk formatting.
Wait a little while before each plugging and unplugging as
the player may still be reading files. Failure to do so may
cause physical damage to the USB player and the USB
device itself. Do not pull out your drive while playing a file.
You can use USB hubs with your TV’s USB inputs. External
power supplied USB hubs are recommended in such a
case.
It is recommended to use the TV’s USB input(s) directly,
if you are going to connect a USB hard disk.
Note: When viewing media files the Media Browser
menu can only display a maximum of 1000 media files
per folder.
Media Browser
You can play back music and movie files and display
photo files stored on a USB storage device by connecting
it to your TV. Connect a USB storage device to one of the
USB inputs located on the side of the TV.
After connecting a USB storage device to your TV
Media
Browser
menu will be displayed on the screen. You can
access the content of the connected USB device any
time later from the
Sources menu. Select the related USB
input option from this menu and press
OK
. You can also
press the Source button on the remote and then select
your USB storage device from the list of sources. Then
select the file of your choice and press
OK
to display or
play it back.
You can set your
Media Browser preferences by using
the Settings menu. Settings menu can be accessed via
the information bar which is displayed on the bottom
of the screen while playing back a video or an audio file
or displaying a picture file. Press the
Info button if the
information bar has disappeared, highlight the gear wheel
symbol positioned on the right side of the information bar
and press
OK . Picture Settings , Sound Settings , Media
Browser Settings and Options menus will be available.
The contents of these menus may change according to
the type of the currently open media file.
Only
Sound
Settings
menu will be available while playing back audio
files.
Loop/Shuffle Mode Operation
Start playback and
activate
All files in the list will be
continuously played in original
order
Start playback and
activate The same file will be played
continuously (repeat)
Start playback and
activate All files in the list will be played
once in random order
Start playback and
activate
,
All files in the list will be
continuously played in the same
random order.
To use the functions on the information bar highlight
the symbol of the function and press
OK . To change the
status of a function highlight the symbol of the function
and press
OK as much as needed. If the symbol is marked
with a red cross, that means it is deactivated.
Custom Boot Up Logo
You can personalize your TV and see your favourite
image or photo on the screen each time your TV boots
up. To do this, copy your favourite image files into a USB
disk and open them in the
Media Browser . Select USB
input from the Sources menu and press OK . You can
also press the
Source
button on the remote and then
select your USB storage device from the list of sources.
When you have chosen the desired image, highlight it and
press
OK to view it in full screen. Press the Info button,
highlight the gear wheel symbol on the information bar
and press
OK . Select Options and press OK to enter. Set
Boot Logo option will be available. Highlight it and press
OK
again to choose the image as custom boot logo. A
confirmation message will be displayed. Select
Yes
and
press OK again. If the image is suitable (*) you will see it
on the screen during the TV’s next boot up.
Note: If you perform a First Time Installation the TV will
return to using the default logo, if any.
(*) Images must have an aspect ratio between 4:3 to 16:9
and they must be in .jpeg, .jpg or .jpe file formats. The
image cannot be set as boot logo, which’s resolution
doesn’t appear on the info banner.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the
FollowMe TV
feature. Install the appropriate Smart Center application
to your mobile device. Start the application.
Advanced features
Getting the most from your TV
Advanced features 24
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,