Bush DLED50UHDHDRS, Инструкция по эксплуатации

Страница: 19 / 64

First Time Installation
When turned on for the first time, the language selection
screen is displayed. Select the desired language and press
OK . In the following steps of the installation guide, set
your preferences using the directional buttons and
OK
button.
On the second screen set your country preference.
Depending on the country selection you may be asked
to set and confirm a PIN at this point. The selected PIN
cannot be 0000. You have to enter it if you are asked to
enter a PIN for any menu operation later.
You can activate
Store Mode option in the next step.
This option will configure your TV’s settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed on
the side of the screen as an info banner. This option is
intended only for store use. It is recommended to select
Home Mode for home use. This option will be available
in Settings>System>More menu and can be turned off/
on later. Make your selection and press
OK
to continue.
Depending on the model of your TV and the country
selection
Privacy Settings menu may appear at this
point. Using this menu you can set your privacy privileges.
Highlight a feature and use Left and Right directional
buttons to enable or disable. Read the related explanations
displayed on the screen for each highlighted feature
before making any changes. You can use
Programme
+/-
buttons to scroll up and down to read the entire
text. You will be able to change your preferences at any
time later from the
Settings>System>Privacy Settings
menu. If the
Internet Connection
option is disabled
Network/Internet Settings screen will be skipped and
not displayed. If you have any questions, complaints
or comments regarding this privacy policy or its
enforcement, please contact by email at smarttvsecurity@
vosshub.com.
Highlight
Next and press OK button on the remote
control to continue and the Network/Internet Settings
menu will be displayed. Please refer to
Connectivity
section to configure a wired or a wireless connection.
If you want your TV to consume less power in standby
mode, you can disable the
Wake On
option by setting
it as Off . After the settings are completed highlight Next
and press OK button to continue.
On the next screen you need to agree to the terms and
conditions of Freeview Play to make use of the related
services. Scroll the page to read the entire text using the
up/down directional buttons or
Pro/- buttons.
Highlight Yes and press OK on the remote to confirm and
proceed. Highlight
No
and press
OK
to proceed without
confirmation. For further requirements for Freeview Play
services refer to the
Freeview Play Platform section.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching and time
zone (depending on the country selection)preferences.
Additionally you can set a broadcast type as your favourite
one. Priority will be given to the selected broadcast type
during the search process and the channels of it will
be listed on the top of the channel list. When finished,
highlight
Next and press OK to continue.
About Selecting Broadcast Type
To turn a search option for a broadcast type highlight it
and press
OK
. The checkbox next to the selected option
will be checked. To turn the search option off clear the
checkbox by pressing
OK after moving the focus on the
desired broadcast type option.
Digital Aerial:
If
D. Aerial
broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
After the initial settings are completed TV will start to
search for available broadcasts of the selected broadcast
types.
While the search continues current scan results will
be displayed at the bottom of the screen. After all the
available stations are stored,
Channels
menu will be
displayed. You can edit the channel list according to your
preferences using the
Edit tab options or press the Home
button to quit and watch TV.
While the search continues a message may appear, asking
whether you want to sort channels according to the
LCN
(*) . Select Yes and press OK to confirm.
(*)
LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Connections
Bringing it all together
Connections 17
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .