![background image](http://html1.mh-extra.com/html/bush-hog/50079152/50079152_operators-manual_2834863016.webp)
Hand Crank Installation
• Tail Bracket
• Retainer Pin
•
1/4” x 1 1/2” Bolt
• Worm Gear
• Set Screws
•
3/8” x 11/4” Bolts
• Crank
• Upper Bracket
•
1/2” x 2” Bolts for models 60 & 68
•
5/8” x 21/2” Bolts for models 78, 87 & 97
First remove the 2 bolts (9) as indicated, and insert the crank tail bracket (1) and reinstall with
5/8” x 2” OR 1/2” x 21/2” bolts (9) (supplied) and lock nuts / lock washer and nut.
Insert retainer pin (2) into the tail bracket. Slide the bottom end of the worm gear (4) on to re-
tainer pin secure with bolt (3) and lock nut , slide the top bracket (8) into place and secure with
bolts (6).
Slide crank (7) into tube as shown and secure with the set screws (5).
Please note! When the blower is raised, the Crank will be closer to the tractor
and could damage the cab or cause injury to the operator!
The Crank package consists of
16