![background image](http://html1.mh-extra.com/html/bush-hog/50079152/50079152_operators-manual_2834863006.webp)
THIRD ANGLE PROJECTION
5
4
3
1
Folder
S:\Solidworks\Solidworks_Elo\Snowblower\75 PT\78 PT Blower 2017\78 PT Blower 2017.SLDASM
DWG. NO.
REV
Model
SCALE 1:48
SHEET 2 OF2
DATE DRAWN
MATERIAL
78 PT Blower 2017
June-02-17 9:00:08 AM
DESCRIPTION
78 PT Blower 2017 Assembly
S:\Solidworks\Solidworks_Elo\Snowblower\75 PT\78 PT Blower 2017\
Weight(lbs.)
0
Width
Height
Length
0
0
914.93
0
Blank Size
Unit of Measure
ITEM ID.
35912
Config ID
Bush hog decals
DIMENSIONS ARE IN INCHES
TOLERANCES NON SPECIFIED:
FRACTIONAL 1/64
BEND 1.0
TWO PLACE DECIMAL 0.01"
THREE PLACE DECIMAL 0.002"
Notes
DO NOT SCALE DRAWING
Model Number
_________________________________________________________
Serial Number
_________________________________________________________
Purchase Date
_________________________________________________________
The serial number for your
SBPT series
blower is located on the back upper right side of the snowblower
assembly.
Please record your serial number here as a handy reference. In case of warranty issues, your dealer will ask for
the serial to verify your warranty.
Serial Number Location
General Information
The purpose of this manual is to assist you in safely operating and maintaining your
SBPT series
Snow Blower in a safe
manner. Read this manual carefully to obtain valuable information and instructions that will help you achieve safe and
dependable service. The illustrations and data used in this manual were current at the time of printing, but due to possible
engineering and or production changes, this product may vary slightly in detail. Bush Hog reserves the right to update and
or change components as necessary without notification.
Intended Use
The Bush Hog series Pull Type Snow Blower is intended for attachment and use on qualified power units for the sole
purpose of clearing snow.
This manual covers models:
SBPT60
SBPT68
SBPT78
SBPT87
SBPT97
In this manual the product may be referred to as blower, snow blower, or machine. Power unit is the engine driven ma-
chine that the snow blower is mounted to.
Operator Orientation
The directions left, right, front and rear, as mentioned throughout this manual, are determined when
sitting in the power units driver’s seat and facing in the direction of travel
6