20
Operating guidelines
TTS - (Text-to-speech)
Reading contacts. The extent of this function can vary depending on mobile phone, network provider
and software installed.
AUX-IN
Is used to connect hands-free car kit with the phone or music player (phone, mp3, tablet). Turning the
music on and off happens through the AUX-In cable.
It i salso possibile to turn the
Mobile audio
on and off.
Installation
Via the ISO cable harness there are different ways of playing music and voice call through the car ra-
dio. There can be set different installation options: 1, 2 or 3, described in section 5.
Equalizer
When playing music we have access to the equalizer - a pack of filters that are used to boost or sup-
press a particular frequency range of sound and to control volume adjustment.
In order to avoid glare when driving at night,
Sleep mode
can be activated. In sleep mode, the display
will turn off after either 15, 30, 60 or 90 seconds. Press the home button to return to active mode.
When a call is incoming, the HFCK activates the display automatically.
In the
Brightness
menu, the intensity of the light diodes in the display can be changed. Use the
horizontal buttons for this.
You can select the
Menu language
upon commissioning, following software updates or after loading
the factory settings.
If you have changed settings and the HFCK is not working as desired then you can return the HFCK
to factory settings with the
Factory settings
function.
Under
Version info
, you can see information on the software and hardware installed on the HFCK.
If the device is not yet built into the vehicle, the update can be implemented anywhere. For this pur-
pose, connect the electronic box with a PC/Laptop using the supplied USB cable. If the device is al-
ready built into the vehicle, please note that the device will only be detected by a PC/Laptop if no
power supply is active within the vehicle. Switch off engine and ignition and connect the device with
a PC/Laptop using the supplied USB cable. Update Manager software and the relevant Firmware can
be found on the product page in the internet at
www.bury.com
.
Note:
Do not switch off the power supply to the HFCK during the update.
X
We recommend that the update of the FSE be implemented by a BURY specialist dealer.
X
Find your nearest specialist dealer under www.bury.com.
