19
Despite the huge number of tested mobile phones, we can not guaran-
tee that all configurations will be compatible with each other while us-
ing multipoint function.
When the CC 9058 is switched on, the device connects with the mobile
phone which was connected last. The prerequisite for this is that it is
located in the vehicle, that the
Bluetooth
function is activated and the
connection identification to the HFCK is not deleted.
If both mobile phones happen to receive a call at the same time then
the primary phone will get priority. The incoming call on the other mo-
bile will be displayed to you after the first call has been answered or
rejected. Then the first call can be ended quickly and then the second
can also be rejected (both of these steps are taken by pressing the end
button) or the first call can be ended and the second call answered (by
pressing the call button).
It is not possible to put the first caller on hold because both callers did
not phone the same number. Should another phone ring during the call
then the incoming call can be rejected by pressing the end button on
the phone.
Note:
For some mobile combinations, in multipoint mode, it can
X
be the case that the voice output during an active phone call
is no longer emitted via the CC 9058 if you accept an incom-
ing call on the second phone using the phone itself.
Completely functional call management can only be guar-
X
anteed by using the CC 9058 control panels.
Automatic connection
At least one telephone is listed in the CC 9058 telephone list. Auto-
matic connection is on and the last connected telephone is searched for
three times, each attempt lasts 5 seconds. If this telephone is not
found, the next telephone in the list is searched for (for 5 seconds).
After this, the list is searched through entirely three times before the
automatic connection is interrupted. The device then returns to stand-
by mode.
While already linked phones are searched for by CC 9058, you cannot
link and connect any other telephone yourself. To link and connect an-
other mobile phone, briefly press down the end call button to interrupt
the automatic connection.
