background image

6

Installation of the hands-free car kit

 4. Positioning and mounting

Step 1: 

First of all, please choose the most convenient position for the attached 
display on the holder and the installation pad in your vehicle by check-
ing different positions in the vehicle. 

If you would like to use the device during your journey, positioning it in 
the front area on the driver’s side is advisable. Sit in the vehicle and 
check whether you can reach the device without difficulty. 

After having found a suitable position for the display in the vehicle you 
can now mount / attach the installation pad / the holder with or without 
the installation pad accordingly. Please use a cleaning cloth for degreas-
ing the surfaces to which you want to attach the corresponding adhe-
sive surface of either the holder or the installation pad. 

The end of the cable with the small Molex connector on the holder is 
ideally suited for placing through small openings in the dashboard area. 
This facilitates a practically invisible installation of the cable. Take the 
length of the cable into account and make sure that it is of sufficient 
length to reach the intended location of the electronics box. 

Important: 

When  positioning  the  monitor  please  take  care  that  the 

 

X

monitor does not impair the view onto the road, that it will 
not be installed in the impact zone of the passenger com-
partment (amongst others in the airbag inflation zones) and 
that the cable may be laid without any problems. 

The  installation  pad  can  be  affixed  just  once,  removing 

 

X

could damage the adhesive area. In case of high variations 
in temperatures - depending on the structure and the fea-
tures - decolourisations of the surfaces can occur during the 
subsequent utilization. 

Please avoid direct sunlight on the monitor or high inter-

 

X

nal  temperatures,  which  can  be  rapidly  reached  in  parked 
vehicles. In such cases, remove the monitor of the hands-
free car kit from the cradle and put it in the car glove pocket 
or glove box for instance.

Содержание CC 9058






























Отзывы: