Burton AIM-50, Руководство по установке, Страница: 6 / 24

4 AIM-50™ Installation Manual − Double Ceiling Version 5000147 A01
Symbols Used in This Manual
WARNING
Disregarding this instruction can present the risk of a serious or fatal
injury.
CAUTION
Disregarding this instruction can result in injury and damage to property.
IMPORTANT
Provides usage tips and useful information.
Transportation and Storage
The following storage conditions apply:
•
Temperature: 0º - 70º C (32º - 158º F)
•
Relative humidity: 10 - 75 % (no condensation)
•
Air pressure: 500 - 1060 hPa
Store all packaged product in closed or covered spaces. Thereafter, the values of the operating
conditions in the Operations and Maintenance manual apply.
Safety Precautions
WARNING
Failure to properly follow installation and preventive maintenance
instructions may result in mechanical failure.
WARNING
Before undertaking any work, ensure that the branch circuit power is off
and secured from accidentally being switched on again.
NOTE This light should only be installed by a qualified electrical contractor.
NOTE
It is the responsibility of the customer and the certified installation
contractor to make sure the supporting wall / ceiling and the anchoring
is safe, adequately strong and in compliance with all applicable building
codes. (See: Static inspection on page 18 and the section Support and
Anchorage below.)
Assembly Preparations
Tools and Accessories Required :
•
Drill
•
Hacksaw
•
Level
•
9/16” (14,3 mm) open-end wrench (or adjustable wrench)
•
Wire cutter/stripper
•
Allen key (3/32 in / 2,4 mm), 3/16 Hex
•
Screwdriver, small flat-blade
•
Wire nuts and wiring for supply connections