Burton AIM-50, Руководство по установке, Страница: 13 / 24

AIM-50™ Installation Manual − Double Ceiling Version 5000147 A01 11
Connecting Power
1. The branch power from the wall switch should now be connected to the terminal block, which
is pre-mounted on the ceiling casting. To insert wires into the terminal block use the technique
shown on the illustration to the right.
2.
Wire the ceiling light as shown in the illustration above.
Notes:
•
The above illustration shows the view looking up toward the ceiling casting.
•
Only installation connections are shown. For a complete wiring diagram, please refer to
the Operation & Maintenance manual.
•
The switches are shown out of place for clarity. In reality, the wires to/from the switches
will be coming from the junction box where the power input is shown.
The terminal block is marked with letters and numbers as follows:
Wires from down tube (to lights):
•
Connect the green ground wire to the green terminal block.
•
Connect the two wires from switch one to terminals marked “A”.
•
Connect the two wires from switch two to terminals marked “B”.