Burstner Trecento 2011 Скачать руководство пользователя

Страница: 124 / 208

124

Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN

Sanitary fittings

10.3

Waste water tank (special equipment)

Emptying:



Use the cap (Fig. 151,3) to close the opening of the waste water tank
(Fig. 151,1).



Use the handle (Fig. 151,2) to pull out the waste water tank.



Fold the carrying handle (Fig. 151,4) up and upright the waste water tank.



Completely empty the waste water tank at disposal stations that are espe-
cially provided for this purpose.

10.4

Filling the water system



Before commencing the journey, empty the waste water tank.



If there is any risk of frost, empty the waste water tank.



Never pour boiling water directly into the sink outlet. Boiling water could
cause deformation and leaks in the waste water pipe system.



Only empty the waste water tank at disposal stations, camping sites or car-
avan sites especially provided for this purpose.

Fig. 151 Waste water tank, mobile



When filling the water tank, observe the maximum permissible gross
weight of the vehicle. Luggage must be reduced accordingly when the
water tank is full.



The water pump will overheat without water and can get damaged. Never
operate water pump when the water tank is empty.

Содержание Trecento 2011

















































































































































































































Результаты поиска

Содержание Trecento 2011

Отзывы:

Похожие инструкции для Trecento 2011

Бренды по названию

Популярные бренды

Burstner Trecento 2011, Руководство пользователя

Результаты поиска

Содержание Trecento 2011

Отзывы:

Похожие инструкции для Trecento 2011

Бренды по названию

Популярные бренды