Burstner Trecento 2011 Скачать руководство пользователя

Страница: 109 / 208

109

Belcanto/Trecento - 10/11 - Ausgabe 07/10 - 1976844 - BUE-0042-06EN

Appliances

The vehicle kitchen unit is fitted with a three-burner gas cooker.

Switching on:



Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".



Open the gas cooker lid.



Depending on the model, fold out or set up the flame protection.



Turn the control knob (Fig. 129,1) on the burner you wish to use to the igni-
tion position (large flame).



Press the control knob down and hold it.



Light the burner with a gas lighter, a match or other suitable means of
lighting.



Once the flame is burning, the control knob must be held down for 10 to
15 seconds, until the thermocouple automatically keeps the gas supply
open.



Release the control knob and turn to the desired setting.



If ignition is unsuccessful, repeat the entire procedure.

Switching off:



Turn the control knob to the 0-position. The flame fades.



Close the gas isolator tap "Cooker" and the regulator tap on the gas bottle.



If there is a flame protection, always put it up when using the gas cooker.



Depending on the model, the gas cooker lid is held closed by a spring.
When closing there is danger of getting injured!



Do not use the glass gas cooker lid as a hob.



Do not close the gas cooker lid while the gas cooker is in operation.



Do not apply pressure on the gas cooker lid when it is closed.



Do not place hot cooking pans on the gas cooker lid.



Keep the gas cooker lid open after cooking until the burners are cool. Oth-
erwise the glass plate could shatter.



Only use pots and pans whose diameter is appropriate for the gas cooker
burners.



When the flame goes out, the thermocouple automatically cuts the gas
supply.



Further information can be obtained in the manufacturer's instruction
manual.

Fig. 129 Operating controls for gas

cooker

Содержание Trecento 2011

















































































































































































































Результаты поиска

Содержание Trecento 2011

Отзывы:

Похожие инструкции для Trecento 2011

Бренды по названию

Популярные бренды

Burstner Trecento 2011, Руководство пользователя

Результаты поиска

Содержание Trecento 2011

Отзывы:

Похожие инструкции для Trecento 2011

Бренды по названию

Популярные бренды