Burster TRANS CAL 7280, Руководство по эксплуатации, Страница: 33 / 40

Model 7280 TRANS CAL
Page 33
Given : Load cell model 8524-6050 strain gauge 350
Ω
Range: 50 kN
Output signal : 1.5016 mV/V
Zero output without fitting parts: 0.0020 mV/V
Adjustment procedure
The 7280 gets activated by pressing the ENTER key.
The following screen is displayed:
1 MEASUR
By pressing
▲
or
▼
you get to the next screen.
2 SYSTEM
Now press ENTER the following screen is displayed:
2.1 LANG
By pressing several times
▲
or
▼
until you get to the following screen:
2.5 PASS
By pressing ENTER you takes to the entering of the password:
0 0 0 0
After entering the password (9373), the sensor can be applied in the adjustment menu. (When
the beam is below a paragraph you can change this by pressing of
▲
or
▼).
You get to screen:
3 ADJUST
After pressing
ENTER
you get to the sensor selection 0 - 9, CURRENT, active, sensor test
SENSOR 1
7. Programmer Example