background image

1

Contents

 ..........................................................................................................................................Pg. 1

Fireplace Parts List ..........................................................................................................................Pg. 2, 3

Burner and Logs Parts List ..............................................................................................................Pg. 4 

Product Overview ............................................................................................................................Pg. 5, 6

Clearance To Combustibles .............................................................................................................Pg. 7

Burntech® Fireplace & Chimney Systems.......................................................................................Pg. 7

Chimney System Heights ................................................................................................................Pg. 7

Supporting Floor Systems

 ...............................................................................................................Pg. 8, 9

What You Will Need .........................................................................................................................Pg. 10

Fireplace Assembly Procedures ......................................................................................................Pg. 11, 12

Burntech® Firebrick Liner ................................................................................................................Pg. 13

Installing Outside Air ........................................................................................................................Pg. 14

Burntech® Chimney Systems ..........................................................................................................Pg. 14

Determining Finished Height for Fireplace ......................................................................................Pg. 14, 15

Installing Vent Plate and Chimney Systems ....................................................................................Pg. 15

Venting Installation

 ...........................................................................................................................Pg. 16

Specifying Chimney Heights ............................................................................................................Pg. 17

Chimney Termination Units ..............................................................................................................Pg. 17

Important Pre-installation Information ..............................................................................................Pg. 17

Installing the Valve/Control Box Assembly .......................................................................................Pg. 18

Install Spill Switch and Baffle Assembly ..........................................................................................Pg. 18

Owner’s Operation & Precautions ...................................................................................................Pg. 18, 19

Attaching the Burner and Grate .......................................................................................................Pg. 19

Checking and Adjusting the Pilot .....................................................................................................Pg. 19

Placing the Decorative Lava Rock ...................................................................................................Pg. 19

Adjusting Air Mixers .........................................................................................................................Pg. 19

Log Placement .................................................................................................................................Pg. 20

Lighting and Operating Instructions .................................................................................................Pg. 21

Maintenance and Service ................................................................................................................Pg. 22

Troubleshooting

 ...............................................................................................................................Pg. 22

Appendix I ........................................................................................................................................Pg. 23

Appendix II .......................................................................................................................................Pg. 24

Warranty

 ..........................................................................................................................................Pg. 25

CONTENTS

Your fireplace must have a rating plate like the sample shown below and should be located inside the lower dome side of your fireplace. 

Model Number, Date of Manufacture and Serial Number should be stamped on the plate where indicated.

NG

LP

7. HOLES: 4X Ø 0.14” THRU

6. CLEAR BOXES NEXT TO MODEL NUMBERS ARE TO BE STAMPED DURING MANUFACTURE OF FIREPLACE.

5. LARGE TEXT TO BOLD UPPERCASE ARIAL, 10 PT. MIN. (WHERE SHOWN).

4. SMALLEST TEXT TO BE ARIAL, 8 PT. MIN (WHERE SHOWN).

3. ALL TEXT AND GRAPHICS TO BE BLACK ON A CONTRASTING, CLEAR ALUMINUM BACKGROUND.

2. FINISH: CLEAR, PROTECTIVE COATING AT RATED TEMPERATURE IN NOTE 1.

1. MATERIAL:  CLASS IIIA , .024 THICK ALUMINUM RATED AT 302°F (150°C).

NOTES

: UNLESS OTHERWISE SPECIFIED

File Name: GBV Series Burntech Rating Plate 11-19-2012.ai

REV: B

DATE: 11/19/12

LAST MODIFIED BY: CB

4.25”

4.00”

6.5”

6.25”

.12”

MFG. DATE:

SERIAL No.

This appliance is not for installation in manufactured or mobile homes.

    rev 19 NOV 2012

GAS

TYPE:

DO NOT REMOVE THIS LABEL

See Burntech Installation & Operating Instructions for 

this model. Contact local building officials about 

restrictions and  installation specifications in your area.

THIS FIREPLACE IS DESIGNED 

FOR USE ONLY WITH THE ANSI 

Z21.50 DECORATIVE GAS LOGS 

AND BURNER TESTED AND 

APPROVED FOR THIS FIREPLACE.

Consult instructions included with this 

firebox for further information.

!

WARNING:

Use only approved, listed chimneys

10” B-Type Vent and DM-12-10” 

system

(1) BFMP525 (included)

(1) GBV-DH10 (included)

Chimney Heights:

Max.: 40 ft.

Min.: 14 ft. (17 ft. with 1 or 2 offset 

sections maximum)

IMPORTANT: Refer to pipe 

manufacturer’s instructions.

!

WARNING:

THIS FIREPLACE HAS  BEEN TESTED 

FOR USE ONLY WITH APPROVED  

GLASS DOORS. TO REDUCE THE 

RISK OF FIRE OR INJURY, CONSULT 

OWNER’S MANUAL.

THIS APPLIANCE NEEDS FRESH AIR FOR SAFE OPERATION AND MUST BE INSTALLED 

SO THERE ARE PROVISIONS FOR ADEQUATE COMBUSTION AND VENTILATION AIR.

!

WARNING:

  THIS FIREPLACE IS NOT INTENDED FOR BURNING SOLID FUELS.

!

WARNING:

This gas appliance must not be connected to a chimney fuel servicing a solid fuel burning appliance.

!

FIREPLACE CLEARANCES TO COMBUSTIBLES:

UNIT FRONT, SIDES, REAR.......................................

0”

TOP..............................................................................

0”

VENT...................................................................1” (25.4 mm)

FRONT..............................................................48” (1219 mm)

PERPENDICULAR WALLS................................8” (203 mm)

FLOOR.........................................................................0”

CEILING............................................................24“ (610 mm)

MANTLE..............................................................3”  (76 mm)

INSULATION FROM FIREBOX...................................0”

The installation, including provisions for combustion, ventilation air, and required minimum permanent vent opening,

must conform with the National Fuel Gas Code (ANSI Z223.1/NFPA 54) and applicable local building codes.

MODEL

  No.:

GBVS39

GBVS44

GBVS49

6520 Platt Ave. #577

West Hills, CA 91307

Report

No. 08-154

ICC Evaluation 

Services Report 

No. 2401

PFS

®

US

EXAMPLE ONL

Y

Содержание GBVS 39/44/49




























Отзывы: