Bürkert 2380, Руководство по эксплуатации, Страница: 22 / 23

22
DISASSEMBLY
Type 2380
13. DISASSEMBLY
13.1. Safety instructions
WARNING!
Danger – high pressure in the system!
▶
Before dismounting the lines and valves, turn off the pressure
and vent the lines.
Risk of electric shock!
▶
Before reaching into the device or the system, switch off the
power supply and secure to prevent reactivation!
▶
Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of injury from improper disassembly!
▶
Disassembly may be carried out by authorized technicians only
and with appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
▶
Secure system from unintentional activation.
13.2. Disassembly of Type 2380
→
Switch off supply voltage and all media supply.
→
Loosen the electric, fluidic and pneumatic connections.
→
Remove the device from the system.
14. TRANSPORT, STORAGE,
PACKAGING, DISPOSAL
NOTE!
Transport damages!
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wetness and
dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
• Protect electrical and pneumatic connections from damage
using protecting caps.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature:
-20 ... +65 °C
Damage to the environment caused by device components
contaminated with media.
• Dispose of the device and packaging in an environmentally
friendly manner!
• Observe applicable disposal regulations and environmental
regulations.
english