Bürkert 2380, Руководство по эксплуатации, Страница: 14 / 23

14
Installation
Type 2380
control air
(port 1)
and
exhaust air
(port 3)
Fig. 7: Pneumatic connections (for Types 8696, 8694, 8692/3)
8.5. Electrical installation
WARNING!
Risk of electric shock!
▶
Before reaching into the device or the system, switch off the
power supply and secure to prevent reactivation!
▶
Observe applicable accident prevention and safety regulations
for electrical equipment!
The electrical connection depends on the controller Type 869x used.
The electrical connection of Type 2380 is described in the
respective operating instructions of Type 869x controllers on
our website www.burkert.com.
8.6. Communication software
The Bürkert PC operating program “Communicator” is designed for
communication with the devices from the Bürkert positioner family (valid
since serial number 20000).
A detailed description for the installation and operation of the
software can be found in the respective operating instructions
- search for Type 8920 („Communicator“).
Download the software and respective operating instructions for
Type 8920 from:
www.burkert.com.
Follow the descriptions in the respective operating instructions for
Type 869x and 8920:
→
First install the „Communicator“ software on the PC
→
Connect the Type 869x to a PC - for that purpose you need a
special USB adapter set mentioned in chapter „Accessories“ in
the respective operating instructions for Type 869x.
To avoid errors during data transfer:
▶
Use the same settings for the serial interface for the
device and in the „Communicator“ software.
For best compatibility and device support:
▶
Use the current version of the software „Communicator“
(download from the Bürkert website)
english