Bürkert 2380, Руководство по эксплуатации, Страница: 19 / 23

19
Spareparts
Type 2380
1x O-ring 20 x 2.5
1x O-ring 52 x 2
1x Bellow
Each set contains:
Fig. 8: Spare part set
Orifice
(bellow size)
Spare part set:
order no.
Corresponding valve body
(seat size engraved in body )
DN3 00796530
DN4
DN4 00796531
DN6 00796532 DN6
DN8 00796533
DN10
DN10 00796534
Tab. 2: Order table
Bellows DN3 and DN4 are both combined with a valve
body DN4. So a change of the valve orifice between DN3
and DN4 can simply be executed by changing the bellow.
However, the device then is no longer consistent with the
type label.
This applies accordingly for bellows DN8/DN10 and the
valve body DN10.
NOTE!
Risk of damage to the bellow / malfunction of the device!
▶
Do not combine bellow and valve body sizes other than shown
in „Tab. 2“.
If a controller needs to be exchanged, the order no. can be found on
the type label of the controller Type 869x.
Devices with additional label “Customized Settings” on
the controller are delivered with preconfigured customer-
specific settings.
▶
Order these spare controllers (Type 869x) with reference
to the device ID number (Type 2380)!
▶
In case an adjustment of preconfigured customer-specific
settings is required for future deliveries, please contact
your Bürkert sales office.
If you have any queries, please contact your Bürkert sales
office - see chapter „4.1. Contact addresses“.
english