TSE BUSINESS 5000
English |
17
Replacement of batteries – knob (inner side)
1
Using the attached hex key, loose the top locking screw on the cylinder
cover. It can be turned out only up to the opening of the cover and will
not fall out.
2
Open the cover
3
Replace the batteries. Make sure the batteries are inserted with a correct
polarity, indicated at the marked point on the housing.
4
Replace the cover.
Emergency key function (outer side)
Using the mechanical emergency key, you can provide access in case of
failure of the system.
1
Swing the emergency key open and then insert it into the indicted slot in
the cover panel.
2
Turn the key 90° clockwise. If required, move the outer knob slightly to
the right and left in order to release the mechanism.
3
Turn the outer knob. The lock opens when fully turned at the latest.
Turn the key to its initial position and take it out. To close the emergency
lock, the knob shall be turned twice fully in both directions.