secuENTRY
English | 4
ENTRY Fingerprint
General information
The electronic cylinder is operated using a scanned finger. Up to 24 fingers
can be programmed using the keypad. The users are created separately
(USER XXX_FP). If a code and/or an transponder should be additionally
assigned to a user, it is to be created separately. Additionally, the lock
can also be operated using a PIN code, the BURG-WÄCHTER KeyApp or a
transponder.
Contents of the delivery
1
QR code keypad
11
Rubber shell
2
keypad
12
Assembly aid
3
Adapter set
13
Disconnecting pliers
4
Inner knob
14
Tx (size 8)
5
QR code Transponder
15
Forend screw
6
Transponder
16
Allen key (size 3)
7
Fixing materials 1 keypad
17
QR-Code Zylinder
18
Cylinder
8
Fixing materials 2 keypad (adhesive
pads)
19
Wall mounting plate
20
Sight protection film
9
Cylinder extension
10
Adapter screws
Attention! The fingerprint sensor must not be cleaned with
detergents. Please use a slightly moistened cloth for this purpose.
Functions:
• Total number of users: up to 50, out of whom number of fingerprints: up
to 24
• A transponder can also be assigned to every PIN code user (except
administrator)
1
17
5
2
8
9
11
15
16
12
13
20
19
6
3
7
10
14
18
4
ENTRY Basic
General information
The electronic cylinder is operated using a transponder. The transponder
should be positioned in front of the cylinder knob.
Subsequent programming of additional transponders can be done using
a secuENTRY keypad or the ENTRY software. The operating range of a
transponder is up to 1 cm.
Contents of the delivery
1
Adapter set
11
Assembly aid
2
Inner knob
12
Disconnecting pliers
3
QR code transponder 1
13
Rubber shell
4
Transponder 1
14
QR code cylinder
5
QR code transponder 2
15
Cylinder
6
Transponder 2
7
Cylinder extension
8
Adapter screws
9
Allen key
10
Forend screw
Functions
• Total number of users: up to 50
Optional locking media:
• ENTRY KP PIN
• ENTRY KP FP (up to 24 fingerprints possible)
14
13
10
9
11
12
5
6
3
1
15
2
8
7
4
Basic indication of the menu functions
When the “Func:M” symbol is displayed, the menu can be reached by
pressing the “FUNC” key. In the menu, the keys “1” and “2” can be used
as a scroll function to navigate through the menu structure. The (Enter) key
can be used to reach the next menu level.
Structure of the menu
Code change menu
Sprache/Language menu
Administrator menu
Create user menu
Create: Code
Create: Transponder
Create: Fingerprint
Assign transponder menu
Delete menu
Additional functions menu
Date adjustment not available in the standard version
Time adjustment => not available in the standard version
Setup menu
Register
Reorganise
FP reset menu
Info menu
Description of the menu
The following text described the functions for the products
ENTRY Pincode
and
ENTRY Fingerprint.
Menu Code change
Changing the administrator code and the user codes
• Activate the keypad using the key
• Then press FUNC
'Menu/Code Change' is
• Confirm your selection using
• Now you can use the keys 1 or 2 to scroll until the administrator / user,
whose user code should be changed, is displayed
• Confirm with
• Enter the code valid so far (existing code) and press
• Enter the new code and confirm it with
• Repeat your entry and confirm it again with
.
“Code change accomplished” is displayed after a correct entry
