Burg Wächter KSC-USB-NET Скачать руководство пользователя страница 181

Страница: 181 / 188

175

Right click

mouse

In real-time monitor mode, pops up shortcut menu: video off, cubeless screen,

input,scheme, main menu, logoff and power off.

Among which, video off applies to turn off video of selected window. Cubeless

screen applies to combine video of different screens into one screen. Input

applies to group input channels.

Exit current menu without saving the modification.

Scroll

Mouse

Wheel

In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
Page up or page down

Move

mouse

Select current control or move control

Drag

mouse

Select motion detection zone.
Select cover area.
Drag input channel into target output channel.

Note:

This manual is for reference only.

All the designs and software here are subject to change without prior written notice.

All trademarks and registered trademarks are the properties of their respective
owners.

If there is any uncertainty or controversy, please refer to the final explanation of us.

Please visit our website for more information.

Содержание KSC-USB-NET





























































































































































































Результаты поиска

Содержание KSC-USB-NET

Отзывы:

Burg Wächter KSC-USB-NET, Руководство пользователя, Страница: 181 / 188

Результаты поиска

Содержание KSC-USB-NET

Отзывы: