Burg Wächter KSC-USB-NET, Руководство пользователя, Страница: 128 / 188

122
Parameter Note
Receiver
Enter the sending address of the message to be sent to up to three
recipients.
Sending
Interval
Mail sending interval, "0" means no interval to send mail. After setting the
interval time, when the alarm, video detection, abnormal event triggered
E-mail, the message will not be triggered according to the alarm signal to
send E-mail immediately, but according to the same type of event before
the interval of mail sent, the main Applies to frequent abnormal events to
produce a large number of e-mail, mail server, the phenomenon of
excessive pressure.
Health Mail
Enable
Health mails can be sent through the system from the test information to
determine whether the success of the mail link. If this option is enabled
and the interval for sending health messages is set, the system sends
test messages at intervals.
Mail Test
Test whether the e-mail function is normal. In the case of the correct
configuration, the mailbox will receive a test message. Before mail
testing, you need to save the mail configuration.
Step 3. Click OK.
4.5.2.5 UPnP
Through the UPnP protocol in the private network and the establishment of mapping between the
external network, external network users can access the external network IP address to access
the internal network equipment. The internal port is the device port, the external port is the router
port, and the user can access the device when accessing the external port. When UPnP is not
used on the router, the UPnP function should be disabled to avoid affecting other functions.
Enable UPnP and the device supports UPnP. In Windows XP or Windows Vista system, if the
system UPnP is open, the device will be automatically detected in Windows Network
Neighborhood.
Windows:
Step 1. Open Control Panel, select Add or Delete program.
Step 2. Click Add/Delete Windows Component.
Step 3. Select Network Server, click Details.
Step 4. Check Internet Gateway Device Found and Control Client, and UPnP UI, confirm and
install.
Set UPnP:
Step 1. Select Setup>Network>UPnP, see Figure 4-52.