secuENTRY easy
English
|
33
Technical details
Blocking times
After 3 x wrong
code is entered 1 minute,
then always 3 minutes
Display
Can be set in 12 languages
Reliable ambient
conditions*
-15 °C / +50 °C / up to 95 % rel. humidity
(non-condensing) The display can react slowly or
darken under extreme temperature changes.
Protection class
Keypad protection class PINCODE IP65
Keypad protection class Fingerprint IP55
Cylinder protection class IP65
Voltage supply
2 x MIGNON LR6 AA ALKALINE for the keypad
2 x MIGNON LR6 AA ALKALINE for the inner knob
1 x CR 123A Lithium for the outer knob
Transmission power
and frequency
range:
Bluetooth Low Energy, Maximum Transmit
Output Power 7,5dBm
Frequency usage range 2.402GHz … 2.483 GHz
Opening
Depending on the equipment variant, the secuENTRY easy plus set can be
operated via a 6-digit numerical code, the BURG-WÄCHTER KeyApp, with
the passive transponder, with the active transponder or fingerprint.
Opening with PIN code
• Switch on the keypad using the key
• Enter the 6-digit PIN code (factory setting “1-2-3-4-5-6”).
“Please turn the rotary knob” appears in the display, and the LED
integrated in the cylinder flashes once when the opening is successful.
• Turn the cylinder knob
Opening with Fingerprint
• Switch on the keypad using the key
• Move the programmed finger from the top to bottom centrally over the
sensor. “Please turn the rotary knob” appears in the display, and the LED
integrated in the cylinder flashes once when the opening is successful.
• Turn the cylinder knob
Opening with Passive transponder
• Hold the transponder at the front at a maximum distance of 1 cm from
the cylinder knob. The LED which is integrated in the cylinder flashes once
upon successful opening.
• Turn the cylinder knob
Please note that during the opening process with the KeyApp, the
active or passive transponder, the keypad must not be switched on
via the
key beforehand!
If you have purchased a secuENTRY easy plus PASSIVE TRANSPONDER, the
number of the respective transponder is stored in the "Type" field.
Tip: The QR code can also be scanned in electronic form or saved as a photo
on a secured data carrier.
The manufacturer accepts no liability for any injuries or damage that
may occur during installation or improper handling.
Additional functions available using the optional secuENTRY
Software, for example:
• User administration
• Assignment of authorisations
• History function
Optical signalling inner knob
The optical signal in form of an LED is incorporated in the knob on the
outside of the door.
You receive the following information via this LED:
• 1x short: Cylinder is engaging
• 2x short: Cylinder is disengaging
• 3x short: Transponder TAG detected, no opening authorisation
• 4x short: Permanent opening activated
• 1x short, 1× long, 2 sec. pause, repeat: Lock in programming mode
• 5× short, 2 sec. pause,
repeat at 20 sec.: Battery in the cylinder depleted
Optical signalling outer knob
The optical signal in form of an LED is incorporated in the knob on the
outside of the door.
You receive the following information via this LED:
• 1x short: Cylinder is engaging
• 2x short: Cylinder is disengaging
• 3x short: Transponder TAG detected, no opening authorisation
• 4x short: Permanent opening activated
• 1x short, 1× long, 2 sec. pause,
repeat: Lock in programming mode
• 5× short, 2 sec. pause, repeat at 20 sec.: Battery in the cylinder depleted
